Date: Wed, 21 Jun 2006 13:05:14 -0700
Reply-To: Gordon Miller <miller22**At_Symbol_Here**LLNL.GOV>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Gordon Miller <miller22**At_Symbol_Here**LLNL.GOV>
Subject: Re: Supplied-air respirator question

The answer is yes. There is an ANSI standard about this, ANSI Z88.6, 
"Medical Clearance Requirements for Respirator Use."

I doubt the evaluation will be extensive with a constant flow hood.

I presume the hose is connected to some kind of air supply unit or 
source. The source needs to meet requirements of 29 CFR 1910.134 or 
state equivalent. These requirements need to be taken seriously 
because people are still dying because:
* An oil-lubricated compressor that was used to supply breathing air 
overheated, cooked the lubricant, and fed lethal levels of carbon 
monoxide to the user, or
* The hose coupling allowed the respirator to hook into a compressed 
gas supply other than air, such as a plant nitrogen system.

In the USA, OSHA prescribes countermeasures for both - using 
breathing air compressors without oil lubrication or 
frequent/continuous CO monitoring and testing to ensure compliance 
with CGA standard G7.1-1989 and requiring unique couplings for 
respirator hoses to avoid connecting to a nitrogen or other gas line.

The OSHA standard is available at:
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=12716

Please feel free to call if you have other questions.

Gordon Miller
Respirator Program Administrator
Lawrence Livermore National Laboratory
P.O. Box 808  (L-379)
Livermore, California 94550
(925) 423-8036
Fax (925) 422-5176
miller22**At_Symbol_Here**llnl.gov

>Hello all,
>I was wondering if anyone knew whether or not a medical evaluation was
>necessary for lab personnel wearing a Supplied-air respirator, from
>reading 29 CFR 1910.134 it looks like they would but I just wanted to be
>sure. This would pertain to someone working in a lab that put on a loose
>fitting hood and have it hooked up to a hose that supplied ambient air to
>the user.
>Thanks,
>Jason

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.