From: Naomi Kelly <nkelly**At_Symbol_Here**CLEMSON.EDU>
Subject: Re: [DCHAS-L] Liquid proof flame retardant lab coats
Date: April 17, 2012 12:13:29 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <BE28425130279043A5B92A2BC7116E239366F9**At_Symbol_Here**EXCH-MBOX-1.exch.ucr.edu>


Wish I did, please let me know if you get positive info on this.

Thanks,
Naomi



On 4/13/12 2:29 PM, Russell Vernon wrote:

One of the challenges we’ve encountered is the liquid absorptive properties of flame retardant lab coats.

Does anyone know of a commercially available flame retardant lab coats that resists absorbing water and other solvents?

 

Thanks in advance,

-Russ

 

Russell Vernon, Ph.D.

Director

Environmental Health & Safety

University of California, Riverside

900 University Ave

Riverside, CA 92521

www.ehs.ucr.edu

russell.vernon**At_Symbol_Here**ucr.edu

 

Direct (951) 827-5119

Admin (951) 827-5528

Fax (951) 827-5122



-- 
Naomi Kelly 
Clemson University
EHS Chemical/Lab Safety Manager
Moorman House
(864) 654-7155
(864) 650-8155

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.