| About This Archive | | DCHAS-L 2013 Index | | DCHAS-L Yearly Index | |
Check out Safety Emporium for your N95, N99, and face shield needs.
|
Previous by Date: Subject: [DCHAS-L] Chemical Safety headlines from Google (21 articles) Date: April 29, 2013 7:23:34 AM EDT Author: "Secretary, ACS Division of Chemical Health and Safety" |
Next by Date: Subject: Re: [DCHAS-L] Chemistry Fume Hood Experience Date: April 29, 2013 10:47:09 AM EDT Author: Mary Ellen A Scott |
From my experience as a formulator of solvent borne coatings and adhesives, even the best designed and constructed fume hood will not function efficiently if it is not installed properly, including proper design of the infrastructure (e.g., make-up air of the laboratory and facility).
Richard Swanson
TheChem
Greater Chicagoland Area
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Jim Johnson
Sent: Sunday, April 28, 2013 5:35 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Chemistry Fume Hood Experience
Good Afternoon,
I would like to start a discussion on current experience with chemistry fume hoods related to overall quality, best value, interior construction, coatings/materials of construction, installation issues, air flow alarms, order lead time, energy saving features plus anything else that comes to mind.
Thank you,
James S. Johnson Ph.D., CIH, QEP
JSJ and Associates
Pleasanton, CA 94588
Previous post | Top of Page | Next post