From: "Koster, Sandra" <skoster**At_Symbol_Here**UWLAX.EDU>
Subject: Re: [DCHAS-L] two questions on flammable material refrigerators
Date: Thu, 1 Aug 2013 14:30:56 -0500
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: CAD4T1-WTma79uwqM5EDH3vuNmgsS_t+OeQJ=c8srLyzT29rabg**At_Symbol_Here**mail.gmail.com
In-Reply-To <81517D60279DA14B9C4EB0E41FBFA68712B21A6F**At_Symbol_Here**bluenose.carroll.edu>


I think the reason for putting NMR solvents in a fridge is to minimize evaporation or pressure build-up. We only keep these solvents refrigerated if they have not been opened; otherwise they can pick up water but we use a flammables refrigerator in case of unexpected leaks. The d-4-methanol is highly flammable and if refrigerated a flammables fridge is certainly required. The DMSO has a high b.p. and is hygroscopic so you probably don't want to refrigerate it.

It is not recommended that peroxide formers be refrigerated so you shouldn't put your ether in even a flammables fridge.

As to just how flammable a material needs to be, the "flammable" designation is a technical one but why take chances? http://www.chem.purdue.edu/chemsafety/newsandstories/refrigstories.htm has some anecdotes that are illustrative.

Sandra Koster
Senior Lecturer
University of Wisconsin-La Crosse


On Thu, Aug 1, 2013 at 12:21 PM, Strode, Kyle <strode**At_Symbol_Here**carroll.edu> wrote:

After a bunch of great replies on flammable refrigerators, I have two follow-up questions.

question 1: A colleague asked me to inquire what the general selection criteria are for deciding which chemicals should be stored in a fridge vs. on the unrefrigerated shelf (I suppose this isn't necessarily a safety question). For those that should be refrigerated, what spec should determine that it should be in a flammables refrigerator and not a regular one? Is it a flash point cutoff or something else?

question 2: The NMR solvents under consideration are CDCl3, d6-DMSO and d4-methanol. Should these even be in a fridge? Should these specific solvents be in a flammables fridge?

Thanks so much for all of the help!

Kyle Strode


Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.