From: Jerry King <jjk7**At_Symbol_Here**MIDWESTLABS.COM>
Subject: Re: [DCHAS-L] Definition of a "wet lab"
Date: Thu, 3 Oct 2013 08:08:46 -0500
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 524D6C5E.7060306**At_Symbol_Here**midwestlabs.com
In-Reply-To <5564F9EDC11C09468EE5DAF02B5CB30F4A8C52B5**At_Symbol_Here**BY2PRD0410MB376.namprd04.prod.outlook.com>


The definition I use is a wet laboratory is one that can carry out the
analytical processes required for a method. I use this term as an
opposite to a dry lab where no analytical work is completed and only a
"result" is provided. Thus, depending on the output of the laboratory;
a sink , hoods, eye washes, instruments,and chemicals would all be
needed in a wet lab.

I also use the dry lab term to infer an imaginary process and a wet lab
as a real process.

J King


On 10/3/2013 6:44 AM, Ralph B. Stuart wrote:
> I'm working with the Cornell Undergraduate Research Board to develop lab safety training for undergrads working in research labs here. A question that arose in this context is:
>
> One other issue I noticed is that some students don't seem to know what a "wet lab" is. This may not be as much of a problem for our targeted group of experienced researchers, but just in case, do you have any suggestions on the best way to describe that to students?
>
> I wonder if anyone in DCHAS land has developed a short answer to that question. "Wet lab" doesn't mean much to me as a lab safety professional, but I know that it's an important concept in the lab planning and design world. Is a sink enough to define a "wet lab"? Is a hood necessary?
>
> Thanks for any help with this.
>
> - Ralph
>
>
> Ralph Stuart CIH
> Chemical Hygiene Officer
> Department of Environmental Health and Safety
> Cornell University
>
> rstuart**At_Symbol_Here**cornell.edu
>
>

--
Jerome J King | Technical Director
Midwest Laboratories, Inc.
13611 B St. | Omaha, NE | 68144
*Phone* 402-829-9890 | *Mobile* 402-658-5005 | *Fax* 402-334-9121
*Email* king**At_Symbol_Here**midwestlabs.com | *Website* http://www.midwestlabs.com

Confidentiality Notice: This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this message in error, please notify us immediately by telephone and destroy the inadvertent information in a confidential manner. Midwest Laboratories, Inc. will make every attempt to assure that our printed reports contain valid information as determined by our analytical procedures, however once our printed or electronic reports leave our possession and control it is possible that those reports could be altered. This possibility is beyond our control. Midwest Laboratories, Inc. retains original copies of all reports.

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.