From: "Williams, Mark" <Mark.Williams**At_Symbol_Here**TELEDYNEES.COM>
Subject: [DCHAS-L] pulling fire alarm for spills
Date: Tue, 18 Feb 2014 14:37:59 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: A22AEA28E740094F9C69038215C80388028F69BCB2**At_Symbol_Here**Tesmail2.teledynees.local


If you are going to consider pulling the fire alarm for a spill, you should meet with your fire department and find out how they are prepared to respond. Let them know what you want from them and find out what their requirements are. If you are lucky enough to live in a state where the fire department is the LEPC, they already have your Chemical Inventory List (right?) and they are trained to respond to spills. If it turns out that your fire department is unable to devote the resources needed to become trained in spill response, you might consider not calling them. In that case you should familiarize your staff with the contact information for your LEPC or whoever you want to call for spill cleanup.


Mark Williams
mark.williams**At_Symbol_Here**teledynees.com
410-472-7733
Teledyne Energy Systems, Inc.
38 Loveton Cir.
Sparks, MD 21152

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.