From: Wayne Wood <wayne.wood**At_Symbol_Here**MCGILL.CA>
Subject: Re: [DCHAS-L] Cadaver Discussion
Date: Thu, 28 Aug 2014 12:28:55 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 4F21A5F3A002444D8B4F5E4B767431E5376856A9**At_Symbol_Here**EXMBX2010-7.campus.MCGILL.CA
In-Reply-To <20140828014259.86LJU.89301.root**At_Symbol_Here**cdptpa-web20>


Peter's post reminds me that anatomists sometimes tamper with their recipes by altering the proportions. We had an experience some time ago where they upped the methanol concentration to try and reduce formaldehyde exposure and they succeeded all right, but in doing so a couple of our measurements surpassed the TLV-STEL (250 ppm) for methanol and they went back to their original recipe. So if you are going to do monitoring, don't forget to test for methanol exposure in addition to formaldehyde.

Ethanol would be a better choice over methanol but we can leave that discussion for happy hour.

W.


-----Original Message-----
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of pzavon**At_Symbol_Here**ROCHESTER.RR.COM
Sent: Wednesday, August 27, 2014 9:43 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Cadaver Discussion

That pretty much allows as much as 98% formaldehyde in the formulation. Sometimes I wonder what the authors of such SDS documents are thinking. (I know, it's the lawyers who are doing their thinking for them. )

Peter Zavon, CIH
Penfield, NY 14526

---- "Nail wrote:
> Greetings,
> Many thanks for the information regarding cadaver labs.
>
> A bit of context: The issue appears to be the idea of converting a classroom into a cadaver lab without exhausting the air from the room directly to the outside of the building.
>
> Part of the on campus dialogue was the claim that the cadavers would not contain formaldehyde. The person making this claim produced a SDS that shows that the embalming fluid contains '1 to 100 % methanol, 1 to 100% phenol, and greater than 1 % formaldehyde'.
>
> John Nail
> Professor of Chemistry
> Oklahoma City University
>
>
>
>
>
>
>

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.