About This Archive  | DCHAS-L 2014 Index   | DCHAS-L Yearly Index
person wearing a disposable face shield and surgical style mask

Check out Safety Emporium for your N95, N99, and face shield needs.

Previous by Date:
2014 Index

2014 Index

 Next by Date:
None this year

Return to the 2014 Index

From: "Secretary, ACS Division of Chemical Health and Safety" <secretary**At_Symbol_Here**DCHAS.ORG>
Subject: Fwd: [DCHAS-L] Better Buildings Alliance Labs Tech Team Webinar on Thursday, 12/18 at 2PM
Date: Wed, 3 Dec 2014 11:36:14 -0500
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 162F4045-E55B-4E75-8514-64E918514EC6**At_Symbol_Here**dchas.org


From: "Fuka, Evan (CONTR)" <Evan.Fuka**At_Symbol_Here**EE.Doe.Gov>
Subject: Better Buildings Alliance Labs Tech Team Webinar on Thursday, 12/18 at 2PM
Date: December 3, 2014 at 11:20:32 AM EST

Greetings,
 
Through the Better Buildings Alliance (BBA), members in different market sectors work with the U.S. Department of Energy's (DOE) network of research and technical experts to develop and deploy innovative, cost-effective, energy-saving solutions that lead to better technologies and more profitable businesses.  Please join us for a BBA Labs Technical Team webinar titled, "Results from a Field Demonstration of Ultra-Low-Temperature Laboratory Freezers" on Thursday, December 18th, 2014 at 2:00-3:00 PM Eastern Time.  
 
Registration URL: https://attendee.gotowebinar.com/register/5043957178728961025 
 
Audio
Participants can use their computer's microphone and speakers (VoIP) or telephone.
United States
Toll: +1 (516) 453-0031
Access Code: 450-340-823
Audio PIN: Shown after joining the webinar
 
Description of the Webinar

Ultra-low-temperature laboratory freezers (ULTs) can be one of the most energy-intensive pieces of equipment in a laboratory, with some using as much electricity as a small house. The U.S. Department of Energy, through the BBA, recently conducted a field demonstration of three high-efficiency ULT models. We found that the high-efficiency ULTs used between 20% and 66% less electricity per cubic foot than typical ULTs over the course of the demonstration, when the data were compared at the same set of operating conditions. These results suggest that high-efficiency ULTs can save laboratories a substantial amount of energy and utility costs. If implemented on a wide scale, high-efficiency ULTs can have a very large energy savings potential nationwide.
 
Thank you,
Evan Fuka
 
Evan Fuka
Energetics, Incorporated
Contractor to U.S. Department of Energy
(202)406-4107
efuka**At_Symbol_Here**energetics.com
 
 
 

Ralph Stuart
rstuartcih**At_Symbol_Here**me.com




Ralph Stuart
Secretary
Division of Chemical Health and Safety
American Chemical Society




2014 index   |  Top of Page  


The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.