This post has been updated. Th' Gaussling, 6/4/16.
If you work with chemicals at the level of chemist in a production environment, chances are at some time in your career you'll be called upon to help decide when a material is too hazardous to use in manufacture. It can be in regard to raw materials or as the final product. Your organization may have protocols or institutional policies or memories relating to certain classes of substances. Some companies, for instance, will not use diethyl ether in its processes. Others may require hydrocarbon solvents *absolutely* free of BTX. Some companies are so fastidious about worker exposure that the faintest whiff of solvent constitutes a breach. One world class company I know requires R&D chemists to include a process hazard analysis, review, and an inspection for all R&D reactions performed in the hood. Whatever the company, most have fashioned some kind of boundary as to what is permissible to have on site and what isn't.
Large chemical companies tend to have large EH&S departments with well established SOP's and protocols with regard to personal protective equipment (PPE) and the measurement of occupational exposure to substances. Larger companies may have an OSHA attorney on retainer and staff members specializing in regulatory compliance.
One might suppose that smaller chemical companies may not have the depth of hazardous material experience that the larger companies have for many reasons. Smaller companies may have smaller capital equipment and a smaller staff. But smaller companies may have a greater organizational freedom which can lead to a great variety of projects. A great variety of projects often means that a great variety of materials are used on site. As such, a smaller company might very well have considerable expertise in a wide variety of chemical substances and, consequently, a wide variety of hazards.
While a smaller chemical company may have considerable expertise in handling its hazardous materials, it may be lacking in infrastructure for administrative controls and regulatory compliance. A wise CEO watches this aspect as closely as the actual operations.
Whether large or small, eventually a company has to draw the line on what hazards it will bring on site. The chemist has some very sober responsibility in this regard. Through the normal ordeal of process development, the diligent synthesis chemist will find the optimum path from raw material to product. All synthesis consists of the exploitation and management of reactivity. But there is always the "deal with the devil". In exchange for a useful transformation, properly reactive precursors must be prepared and combined. A mishap with a 1-5 liter reaction on the bench top is messy and possibly an immediate threat to the chemist. But that same reaction in a 50 gallon or 5000 gallon pot can turn into the wrath of God if it runs away. The chemists judgment is the first layer of protection in this regard. All process chemists have to develop judgment with respect to what reagents, solvents, and conditions are feasible. Economics and safety come into play.
A runaway reaction poses several kinds of threats to people, equipment, and the viability of the company. There is the immediate thermokinetic threat stemming from the PV=nRT, meaning that energy can be dumped into PV work leading to the high speed disassembly of your equipment. A prompt release of heat and molecules kicked into the gas phase may or may not be controllable. Especially if the runaway leads to non-condensable gases. A runaway has a mechanical component in addition to the chemical action.
An runaway may cause the reactor contents to be abruptly discharged. Several questions should be answered ahead of time. Where do you want the contents to go and what are you going to do with it once it is there? Catchpots and emergency relief systems are common and resources should be invested there.
A question that the wary chemist must ask is this: What if a cloud of my highly useful though reactive compound gets discharged into the air or onto the ground? Do the benefits of this reagent outweigh the downside costs? Even if a release is not the result of a thermokinetic disaster like a runaway, explosion, or fire, a simple release of some materials may be consequential enough to require the evacuation of a neighborhood. Once your materials have left the site in the form of a cloud or a liquid spill and you make the call to the fire department, you have lost control of the incident. Even if nobody gets hurt or exposed, the ensuing regulatory "administrative explosion" may knock you down.
A chemical process incident can have mechanical consequences, chemical release issues, and the matter of fire. Substances that are pyrophoric have automatic ignition problems that may be surprisingly easy to deal with, especially if they are liquid. Liquid transfer systems can be inerted easily and pyrophoric liquids can be transferred airlessly and safely. Pyrophoric solids are another matter. There are few generalizations I can make about pyrophoric solids. Inert solids pose enough handling issues without having the added complication of air/water sensitivity. All I can say about pyrophoric solids- waste or finished product- is that you will need specialized equipment and a big tank of LN2. Production glove boxes and Aurora filters are particularly useful. Also required is a space on the plant site where you can open up a container and let the contents burn if needed. If air gets into a drum of pyrophoric solids, it''ll begin to get hot. That is when you need to have an open spot where it can take off and not bring the facility down. Industrial parks are a bad place for such material handling.
When designing a chemical handling space, it is important to think about what happens in a fire. Flammable liquids are under the constant influence of gravity and will run to the low point on a floor. The question you have to ask is this: Where do I want the burning liquid to go? There are good choices and poor choices. Burning pools of organic liquids radiate considerable energy per sq ft per sec. The temperature of nearby objects will rise rapidly to the flash point and the ceiling spaces will accumulate smoke and hot gas. Drums and cylinders filled with flammable liquids or gases will eventually overpressure and release their contents adding to the mayhem. The release can be in the form of a BLEVE or a flood of flammable liquid leading to a widespread pool fire.
Such flammable liquid scenarios can begin many ways. Forklift and maintenance operations are particularly rich in opportunity for a fire. The physical location of flammable liquid storage must be well thought out. Ideally a warehouse fire should not be allowed to spread to capital equipment locations. This helps to keep workers out of harms way and contains the magnitude of the financial disaster as well. Since most chemical plants seem to grow organically over time, unfortunate choices are usually made in regard to incident propagation.
There are resoures available to quantitate the risks of such releases. The American Institute of Chemical Engineers (AIChE) is well organized and provides much literature on the topic of chemical plant safety. In particular I am thinking of Dow's Chemical Exposure Index Guide, 1994, 1st Edition, AIChE, ISBN 0-8169-0647-5. This handbook takes the reader through calculations aimed at estimating the risk and likelihood of chemical releases.
Also available is Dow's Fire & Explosion Index and Hazard Classification Guide, 1994, Seventh Edition, AIChE, ISBN 978-0-8169-0623-9. This handbook supports the use of a quantitative risk analysis chart for the use of a risk and hazard index for generating numbers associated with process activities for cost/benefit analysis. It is well worth the addition to your library.
When is a substance just too hazardous? Well, there are nitroglycerine plants in operation as well as phosgene factories. Most risks can be abated by properly thought-out processing and packaging. It really comes down to personal choice. Is that ammonium perchlorate plant that just offered me a job operated safely? Nitroglycerine, phosgene, and ammonium perchlorate all have properties that lead to demand for their use. Somebody is going to supply that demand. We chemists have to look inward and then act with our eyes wide open and our heads on a swivel. Myself? I wouldn't work in a nitroglycerine factory, but I'm glad that someone does.'
[Added 6/4/16 by Th' Gaussling] I happened to go back to this post and in doing so read a comment by "Bob", which you can see in the comment section below. Here is a copy
"I actually believe that as a society should keep the safety rules relaxed a bit in academia. Academia, for better or worse, is our national chemical research institution"
So underpaid grad students, postdocs and staff working at a univeristy are less human, and less deserving of safety than their for profit brethren?
That's diabolical Mr. Gaussling. Pure evil incarnate. For whose gain do you sacrifice their lives?
I want to address this now better than I did back then. To Bob I say this: Everyone has a right to a safe workplace. Academic institutions as well as industrial operations must use best practices in regard to worker safety. This is axiomatic. Plainly I did not articulate my contention as well as I could have. I will do so now.
We have to assume that junior chemists are likely grow to be senior chemists in an organization. The role of a senior chemist in industry for example, may be quite varied through her/his career. A senior chemist who has stayed in the technical environment will almost unavoidably have been confronted with a large variety of questions in regard to circumstances and outcomes relating to hazardous materials and tricky reactions. Moreover, a senior chemist is likely to have been promoted to a level that also involves supervision, the drafting of SOPs, work instructions, MSDS documents, emergency planning, laboratory design, etc.
In my view, a senior chemist as described above has an ethical and moral responsibility to coworkers, plant operators, material handlers, and customers to oversee chemical safety. A chemist at any level has a responsibility to make known to all involved what dangerous circumstance might arise with any given chemical operation. Either in relation to the hazardous properties of substances that may be released in mishandling, or in regard to hazardous processing conditions that can lead to danger.
I've used the word hazard(ous) and the word danger(ous). We need some clarity on this. If you Google the words and stop with the dictionary definitions you will be left with the shallow notion that they are synonyms. If you dig deeper, say at the website of the Canadian Centre for Occupational Health and Safety (OSH), you will find a definition of "hazard" that I find particularly useful. To wit:
A hazard is any source of potential damage, harm or adverse health effects on something or someone under certain conditions at work. [italics mine]
The same fuzziness in definition exists for the word danger(ous) as well. A definition I prefer is below:
A dangerous occurrence is an unplanned and undesired occurrence(incident) which has the potential to cause injury and which may or may not cause damage to property, equipment or the environment. [italics mine]
This definition is borrowed from the University College Cork, Ireland (UCC). I believe this is a good definition and it readily sits apart from the definition of hazard above.
The key difference is that a hazard is any source of potential of damage ... under certain conditions.. whereas danger is a condition brought on by an unplanned or undesired occurrence. Next, lets consider these terms in the context of chemistry.
On the shelf in the fire cabinet is a glass bottle of phosphorus oxychloride, properly sealed and segregated. As the POCL3 sits on the shelf in the cabinet, I would argue that it is only hazardous. If, however, you pick up the bottle and in walking to the fume hood drop it causing it to break and spill the contents in the open, you've caused a dangerous situation. It's an imminent threat to health and safety.
Conversely, let's say that you carried the bottle to the hood, used it, then returned it to storage without incident. In the reaction the POCl3 is consumed and in the workup the residual acid chloride is quenched by water. Congratulations! You have taken a hazardous material, used it safely, passivated the actives during workup, and eliminated at least the acute hazard relating to POCl3.
In the first situation, a hazardous material was mishandled and became dangerous. In the second situation, the hazardous material was handled properly, consumed, and residuals passivated. In this case a hazardous material was used safely and to positive effect.
Seem trivial? Well, it's not. This difference in meaning leads to a confusion that is especially acute among the non-chemist population. But my point lies takes us to the question of how students are taught to use hazardous materials.
I spoke of relaxing safety requirements in academia. An example of such a thing might be the use of diethyl ether. This useful solvent is banned outright in some chemical manufacturing operations across the country owing to the flammability. Even in their R&D labs. This is corporate policy handed down by those responsible for risk management, not scientists. In some industrial labs, woe is he who has an unexpected occurrence like a boil-over or a spill.
I believe that Et2O should remain in academic research labs for both the research value and for the development of valuable lab experience by students and postdocs.
You learn to handle hazardous materials by having the opportunity to handle hazardous materials.
Ether is only a simple example of what I'm trying to communicate. In order for chemists to graduate as experienced scientists with working familiarity in the properties of substances, they must have experience handling and using a large variety of substances, many of which may be substantially hazardous. And by hazardous I mean much more than just toxic. A substance may have a reactive hazard aspect that is a large part of it's utility. To safely handle substances that pose a reactive hazard, a chemist needs to have experience in using it. And killing it. The chemist must try to gauge the level of reactivity and modify the use of the substance to use it safely. If you've made or used a Grignard reagent you know what I mean. Expertise in laboratory chemistry only comes through direct experience.
Hazardous reactive materials do useful things under reasonable conditions. Non-hazardous, unreactive materials find great utility in road and bridge construction.
If we regulate out all of the risk by eliminating hazardous materials in academic chemistry, what kind of scientists and future captains of industry are we producing? What we can do is to put layers of administrative and engineering protection in the space where the hazardous transitions to the dangerous. Academic laboratory safety is promoted by close supervision by experienced people. Limits on the amount of flammables in a lab space, proper syringe use, safe quenching of reactive residues, proper use of pressurized equipment, and a basic assessment of reactive hazards present in an experiment will go a long way to improving academic lab safety. Experienced people usually have a trail of mistakes and mishaps behind them. If we corporatize the academic research experience to a zero risk condition, we may kill the goose that lays the golden egg.
