From: Michael <mabuczynski**At_Symbol_Here**HOTMAIL.COM>
Subject: Re: [DCHAS-L] Help in preparing SDS's
Date: Mon, 1 May 2017 13:25:55 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: BLUPR18MB03855BC9D0805678AD212277AB140**At_Symbol_Here**BLUPR18MB0385.namprd18.prod.outlook.com
In-Reply-To <1ae4e4.7eabe21a.463878c8**At_Symbol_Here**aol.com>


"One SCHC course does not a SDS author make".  The SCHC is the best Haz Com professional association there is and they have a very diverse series of related courses to help the HC professional become professional. If this is a one of SDS request then contact the vendors /consultants mentioned in these messages and get your SDS created for a few hundred dollars.  If this area is becoming a job responsibility then join the SCHC and get on track for learning about all of the necessary area needed to perform this authoring properly and with success.


Mike




From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU> on behalf of 000003675402d576-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU <000003675402d576-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU>
Sent: Monday, May 1, 2017 6:40 AM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: Re: [DCHAS-L] Help in preparing SDS's
 

Although it is not yet posted on the web, SCHC will be offering a SDS course in September 2017, U.S. Hazard Communication for Workplace Chemical Products (HCS 2012) - Overview of Requirements and Practical Examples in SDS and Label Preparation.

 

http://www.schc.org/u-s-hazcom-for-workplace-chemicals


 

 

Michele Sullivan

 

 

 
In a message dated 4/30/2017 2:43:25 P.M. Eastern Daylight Time, mrakas**At_Symbol_Here**SMITH.EDU writes:
You may want to contact the Society for Chemical Hazard Communication (SCHC)...when I wrote MSDS's during the Dark Ages (1990's) they were a fabulous resource and they are still in existence, I checked...

Margaret

On Sun, Apr 30, 2017 at 1:20 PM, Jack Armstrong <jack**At_Symbol_Here**azsafety.com> wrote:
I have a client who is developing a new product and hoping to have one of their Lab technicians develop the SAS required for this product.

Can anyone recommend a training program that will provide the necessary skills for preparing an SDS?

Best regards,
Jack
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas



--
Margaret A. Rakas, Ph.D.
Manager, Inventory & Regulatory Affairs
Clark Science Center
413-585-3877 (p)

--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.