From: Monona Rossol <0000030664c37427-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU>
Subject: Re: [DCHAS-L] ether for anesthetizing fruit flies
Date: Fri, 7 Feb 2020 14:52:55 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 1380241738.275548.1581087175179**At_Symbol_Here**mail.yahoo.com
In-Reply-To


And if any faculty member or administrator still is not convinced, my guess is that the proper ventilation system described by Monona would entail a substantive noise problem, negatively impacting safety in that lab [including leading people to shut it off-].
This reinforces my point that you guys are only seeing the crap designed and installed by HVAC guys that don't specialize in this stuff.

These systems don't have to be noisy at all if you have a designer that know how to do this.  We have systems so quiet you can hold an opera rehearsal near a wood dust collector and barely hear it.  And air curtains running the length of the stage lip that keep theatrical fog out of the orchestra pit on B'way that can't be heard by people in the front row.

And now that one of the true geniuses of this kind of design, David Gordon, passed away this past October, I can't find a replacement, not even when I talk to people who are recognized experts.  It takes someone who not only understand the basic principles in the ACGIH manual, but someone who knows how to do internal bracing of hoods to prevent vibration, to bend the edges of slot vents to provide a smooth surface for the air to pass, damp the duct so the vibrations from the fan can't get transferred, and so on. 

I shall keep looking, but I only have worked on a project with one other engineer who could do this, and he is tied to a large firm and doesn't consult.  Ah me. 

Monona


-----Original Message-----
From: Stephen Stepenuck <sstepenuck**At_Symbol_Here**NE.RR.COM>
To: DCHAS-L <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Sent: Fri, Feb 7, 2020 5:45 am
Subject: Re: [DCHAS-L] ether for anesthetizing fruit flies

Not that the use of ether in this case needs one more nail in its coffin [or this thread needs one more post], but speaking of case histories: a Biology colleague once told me that he had witnessed a case where ether vapors had rolled off the bench, out of the lab, down the hall, and down three flights of stairs, where they met a source of ignition.  The flame front made it back up the stairs, up the hall, and into the source of the vapors, with the obvious bad results.

Diffusion is the movement of molecules in the absence of bulk flow, but it does not occur at the expense of bulk flow.
Let's remember too that we should plan not simply thinking of the calculated amount of ether used by the 12-14 students, but for the case where somebody drops the reservoir bottle.
-And if any faculty member or administrator still is not convinced, my guess is that the proper ventilation system described by Monona would entail a substantive noise problem, negatively impacting safety in that lab [including leading people to shut it off-].

Good luck.
Steve

--
Stephen J. Stepenuck, Ph.D.
Emeritus professor of chemistry
Keene State College
Keene NH 03435-2001
sstepenuck**At_Symbol_Here**ne.rr.com
603.352.7540


On 2/6/20, 1:46 PM, ACS Division of Chemical Health and Safety on behalf of Ellen M. Sweet  wrote:

Once again this group has hit the nail on the head! You guys are amazing!
 
At this point, in the conversation with the college, we are moving to using carbon dioxide. With my and the course  instructors experience, we are hoping for CO2 cylinders at each bench and tubing to each station with clamps to shut the flow when needed. I'd like to try out the alka seltzer option! But, we don't have experience with that one yet, so that might be a supplement.
 
I did some field work with ether this week. This and FlyNap pose problems that I'm not confident ventilation can solve in this setting. Substitution to the lesser hazard, being carbon dioxide gas, transfers the operational costs from the college level to the department level in this case. But, the potential exposure to hazardous emissions is like night and day.
 
This would make a great case study! Thanks for the advice everyone.
Ellen
 
From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU> On Behalf Of Monona Rossol
Sent: Thursday, February 6, 2020 12:53 PM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: Re: [DCHAS-L] ether for anesthetizing fruit flies
 
That's the problem I wrote about.  HVAC people usually can't do this or don't do it well.  And the problems with doing it right are legion.  For example, someone suggested a slot vent at the back of each bench.  In order to draw the length of the bench, they are going to need a somewhere between 1000 and 2000 fi/m slot face velocities and either partial enclosure at the back of the table or three slots to accommodate the diffusion by evaporation of solvents on the bench.  We are already into a lot of custom metal work and sight line problems for the instructor in the class.
 
So these slots have to draw a lot of air, and with 12 to 14 students in the room that will be gassing fruit flies, even if you branch duct 6 slot hoods together and have a centerline velocity of 3000 f/m in the duct to cut down on diameter, you are looking at finding a chase to the roof for two ducts that are probably 20 inches in diameter or more.  Add that to the fume hood ducts that also need to go to the roof and you have a major chase design issue.  Say nothing about energy cost for heating and cooling.
 
And in my other email, I provided the basic formula for doing it by dilution ventilation and that also requires a lot of air and energy.  
 
A laboratory in which there is bench work CANNOT be designed until the users tell the designers exactly what they intend to do on those benches and with what chemicals.  There is no ASHRAE lab one-size-fits all as soon as bench work is done.  And using solvents of any kind on open benches is going to be expensive..  Fine with me --- I get paid for working out a good hood for the proposed work and the specs for the engineers who do the system.  
 
But clearly, if you can kill critters other ways and don't do it, you sure aren't part of the green revolution.
 
Monona
 
-----Original Message-----
From: Stuart, Ralph <Ralph.Stuart**At_Symbol_Here**KEENE.EDU>
To: DCHAS-L <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Sent: Thu, Feb 6, 2020 7:59 am
Subject: Re: [DCHAS-L] ether for anesthetizing fruit flies
> >Avoid using hazardous chemicals for such a task.
>
While this is a reasonable response, as has been demonstrated by the many posts about the disadvantages of ethyl ether and possible alternatives, I know that this particular teaching lab has been doing this work with ethyl ether for at least 40 years. The use of ethyl ether has been discussed by many generations of lab instructors with many generations of EHS professionals (including me).

The fact that the use of ether persists suggests that it would be prudent to design the lab ventilation system to manage ether. Even if the next generation of lab instructors decide to move to a different agent, it's possible that the one after that will return to ether. There are few EHS staff that have the authority to force specific changes on managers of lab processes.

- Ralph

Ralph Stuart, CIH, CCHO
Environmental Safety Manager
Keene State College
603 358-2859

ralph.stuart**At_Symbol_Here**keene.edu


---
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.