Date: Tue, 25 Mar 2008 16:47:43 EDT
Reply-To: Labsafe**At_Symbol_Here**AOL.COM
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Jim Kaufman <Labsafe**At_Symbol_Here**AOL.COM>
Subject: Glass Failure Analysis
Comments: To: SAFETY**At_Symbol_Here**list.uvm.edu, labsafety-l**At_Symbol_Here**siu.edu, CSHEMA-L**At_Symbol_Here**LISTS.UMN.EDU
Can anyone recommend a testing laboratory that can perform failure analysis  
on laboratory and pilot plant scale glassware/reactors?
 
James A.  Kaufman, Ph.D.
President/CEO

The Laboratory Safety Institute  (LSI)
A Nonprofit International Organization for
Safety in Science and  Science Education

192 Worcester Road, Natick, MA  01760-2252
508-647-1900 Fax: 508-647-0062
Cell: 508-574-6264 Res:  781-237-1335
jim**At_Symbol_Here**labsafety.org _www.labsafety.org_ (http://www.labsafety.org/) 
P
We thank you for printing this e-mail  only if it is necessary


**************Create a Home Theater Like the Pros. Watch the video on AOL 
Home.      
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.